Shortcuts To 400-051(3 to 12)

We provide real 400-051 exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass Cisco 400-051 Exam quickly & easily. The 400-051 PDF type is available for reading and printing. You can print more and practice many times. With the help of our Cisco 400-051 dumps pdf and vce product and material, you can easily pass the 400-051 exam.


♥♥ 2018 NEW RECOMMEND ♥♥

Free VCE & PDF File for Cisco 400-051 Real Exam (Full Version!)

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 400-051 Exam Dumps (PDF & VCE):
Available on: http://www.surepassexam.com/400-051-exam-dumps.html

P.S. Free 400-051 discount pack are available on Google Drive, GET MORE: https://drive.google.com/open?id=1fIJ1rtgTf26lN5cmu9J7roE2Ul71FYPj


New Cisco 400-051 Exam Dumps Collection (Question 3 - Question 12)

New Questions 3

Refer to the exhibit.

Which three options are potential reasons the FXO port is not receiving Caller lD? (Choose three.)

A. "Enable Caller lD" was not configured on the Cisco Unified Communications Manager configuration.

B. The FXO port was configured to "loop-start" instead of "ground-start".

C. The Timing Guard-out parameter is incorrectly set to 1500 ms.

D. "Connection polar opx immediate" was used and does support caller lD.

E. Gateway with lOS 12.4(24T) was used and does not support this feature.

F. The NTFY message contains a Hung Up parameter.

Answer: A, C, E


New Questions 4

Refer to the exhibit.

How many failed token password attempts have occurred on this Cisco CTL client?

A. 4

B. 9

C. 14

D. 19

E. 24

Answer: C


New Questions 5

Refer to the exhibit.

An engineer is upgrading existing frame-relay network to MPLS using Ethernet. The amount of bandwidth from service provider will remain the same. What two issues the engineer must consider when changing from frame-relay to Ethernet for voice connectivity? (Choose two)

A. Overhead with Ethernet L2 is much smaller than Frame-Relay L2 headers

B. Using G711 codec, calls will consume slightly more bandwidth over Ethernet than frame-relay calls

C. Ability to use header compression will not be available when using ethernet

D. Using G711 codec, calls will consume slightly less bandwidth over Ethernet than frame-relay calls

E. Ethernet and MPLS will allow engineer to implement QoS which is not available on frame relay

Answer: BC


New Questions 6

Refer to the exhibit.

Which SlP message will trigger the calling device to open channels for early media reception?

A. 180 Ringing

B. ACK

C. lNVlTE

D. 183 session-progress

E. 200 ok

Answer: D


New Questions 7

An engineer notices that two Cisco utility Connection servers in a cluster are in split-brain mode. The engineer corrects a network issue that allows the two servers to communicate again. Which two statements describe negative effects of this event? (Choose two)

A. A user calling in to check their voicemail during the recovery may be informed that their messages are not available.

B. Message waiting lights van become out of sync after the split-brain recovery. Forcing the administrator to run an MWl Synchronization.

C. The replication between the nodes becomes defunct, requiring the administrator to run utils cuc cluster activate to re-establish intracluster.

D. A message left on the subscriber server during the outage may be lost during the cluster recovery.

E. The replication between the nodes becomes defunct, requiring the administrator to run utils cuc cluster

renegotiate to re-establish intracluster communication.

F. The Unity Connection Database can become corrupted, causing the need to reinstall the subscriber server.

Answer: A, C


New Questions 8

Which definition is included ina Cisco UC on UCS TRC?

A. storage arrays such as those from EMC or NetApp, if applicable

B. configuration of virtual-to-physical network interface mapping

C. step-by-step procedures for hardware BlOS, firmware, drivers, and RAlD setup

D. server model and local components (CPU, RAM, adapters, local storage) at the part number level

E. configuration settings and patch recommendations for VMware software

Answer: D

Explanation:

What does a TRC definition include?

Definition of server model and local components (CPU, RAM, adapters, local storage) at the orderable part number level.

Required RAlD configuration (e.g. RAlD5, RAlD10, etc.) - including battery backup cache or SuperCap - when the TRC uses DAS storage

Guidance on hardware installation and basic setup (e.g.clickhttp://www.cisco.com/en/US/docs/voice_ip_comm/cucm/virtual/servers.htmlhere).

Clickhttp://www.cisco.com/go/ucsherehttp://www.cisco.com/go/ucsforhttp://www.cisco.com/go/ucsdetailedhttp://www.cisco.com/go/ucsCiscohttp://www.cisco.com/go/ucsUCS

http://www.cisco.com/go/ucsserverhttp://www.cisco.com/go/ucsdocumentation regarding hardware configuration procedures.

Configuration of Virtual-to-physical network interface mapping is design-dependent and not included in TRC definition.

Configuration of adapters (such as Cisco VlC, 3rd-party CNA / NlC / HBA) is design-dependent and not included in TRC definition.

Configuration settings or step by step procedures for hardware BlOS, firmware, drivers, RAlD setup are not included.

Clickhttp://www.cisco.com/go/ucsherehttp://www.cisco.com/go/ucsforhttp://www.cisco.com/go/ucsdetailedhttp://www.cisco.com/go/ucsCiscohttp://www.cisco.com/go/ucsUCShttp://www.cisco.com/go/ucsserverhttp://www.cisco.com/go/ucsdocumentation.

Design, installation and configuration of external hardware is not included in TRC definition, such as:

Network routing and switching (e.g. routers, gateways, MCUs, ethernet/FC/FCoE switches, Cisco

Catalyst/Nexus/MDS, etc.)

QoS configuration of route/switch network devices

Cisco UCS B-Series chassis and switching components (e.g. Cisco UCS 6100/6200, Cisco UCS 2100/2200, Cisco UCS 5100)

Storage arrays (such as those from EMC, NetApp or other vendors)

Configuration settings, patch recommendations or step by step procedures for VMware software are not included in TRC definition.

lnfrastructure solutions such as Vblock from Virtual Computing Environment may also be leveraged for configuration details not included in the TRC definition.

Reference:

http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware#UC_on_UCS_Tested_Reference_Configurations


New Questions 9

Refer to the exhibit.

A collaboration engineer is configuring dynamic call routing and DN learning between two Cisco

UCM and Two Cisco UCM express. What two configuration tasks will support this? (Choose two)

A. should be configure as service advertisement forwarder only

B. should be configure as service advertisement client and forwarder

C. Router A and should be configure to use the same autonomous system number

D. Router A and should be configure to use the same autonomous system number

E. Router and should be configure to use the same autonomous system number

F. should be configured as service advertisement client only.

Answer: B,C


New Questions 10

Refer to the exhibit.

lf this SlP call is initiated using early offer, which SlP message will UA#2 use to communicate its media capability to UA#1?

A. lNVlTE

B. 180 Ringing

C. 200 OK

D. ACK

E. RTP Media

Answer: C

Explanation:

ln Early offer, SlP Send SDP in the invite, the other node will send the SDP in the 200 message.


New Questions 11

Which SlP request method enables reliability of SlP 1xx response types?

A. ACK

B. PRACK

C. OPTlONS

D. CANCEL

E. REGlSTER

Answer: B

Explanation:

ln order to achieve reliability for provisional responses, we do nearly the same thing. Reliable provisional responses are retransmitted by the TU with an exponentialbackoff. Those retransmissions cease when a PRACK message is received. The PRACK request plays the same role as ACK, but for provisional responses. There is an important difference, however. PRACK is a normal SlP message, like BYE. As such, its own


New Questions 12

Refer to the exhibit.

A collaboration engineer configures Cisco Unified CM location using G.711 and iLBC for each site. The bandwidth for each link is shown. Which two options represent the maximum concurrent number of calls supported by grand junction to Casper for each Codec? (Choose two.)

A. 20 G.711 calls

B. 18 G.711 calls

C. 36 iLBC calls

D. 42 iLBC calls

E. 11 G.711 calls

F. 51 iLBC calls

Answer: C,E


Recommend!! Get the Free 400-051 dumps in VCE and PDF From Certifytools, Welcome to download: https://www.certifytools.com/400-051-exam.html (New 615 Q&As Version)