Microsoft AZ-101 Braindumps 2019

Your success in AZ-101 Exam Questions is our sole target and we develop all our AZ-101 Exam Questions in a way that facilitates the attainment of this target. Not only is our AZ-101 Free Practice Questions material the best you can find, it is also the most detailed and the most updated. AZ-101 Free Practice Questions for Microsoft AZ-101 are written to the highest standards of technical accuracy.

Online Microsoft AZ-101 free dumps demo Below:

NEW QUESTION 1
You have a Microsoft SQL Server Always On availability group on Azure virtual machines. You need to configure an Azure internal load balancer as a listener for the availability group. What should you do?

  • A. Enable Floating IP.
  • B. Set Session persistence to Client IP and protocol.
  • C. Set Session persistence to Client IP.
  • D. Create an HTTP health probe on port 1433.

Answer: A

Explanation: Incorrect Answers:
D: The Health probe is created with the TCP protocol, not with the HTTP protocol. References:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/sql/virtual-machines-windows-portal-sql-alwayson-int-listener

Case Study: 3
Lab 1
SIMULATION
The following section of the exam is a lab. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task. Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please, note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
To start the lab
You may start lab by clicking the Next button
Tasks
Click to expand each objective
To connect to the Azure portal, type https:/portal.azure.com in the browser address bar.
Instructions
Performance Based Lab
This type of question asks you to perform tasks in a virtual environment.
The screen for this type of question includes a virtual machine window and a tasks pane.
The window is a remotely connected live environment where you perform tasks on real software and applications.
On the right is a Tasks pane that lists the tasks you need to perform in the lab. Each task can be expanded or collapsed using the “+” or “-” symbols. A checkbox is provided for each task. This is provided for convenience, so you can mark each task as you complete it.
Tasks
Click to expand each objective
-Configure servers
Add the “Print and Document Services” role to server LON-SVR1, installing any required management features and enabling both Print and LPD Services.
+Configure file and share access
When you are finished performing all the tasks, click the ‘Next’ button.
Note that you cannot return to the lab once you click the ‘Next’ button. Scoring occur in the background while you complete the rest of the exam.
Comments
Once the exam completes, the comment period will begin and you will have the opportunity to provide comments to Microsoft about the exam questions. To launch the comment period, click the “Finish” and then “Comment” buttons. To skip the comment period and the exam, click Exit.
You can navigate to a question from the Review screen to provide a comment. Please, see the Review Screen tab in the Review Screen help Menu (which can be accessed from the Review Screen) for details on accessing questions from the Review Screen.
To comment on a question, navigate to that question and click the Give Feedback icon. When you have entered your comment in the comment window, click Submit to close the window. To navigate to the Review screen again, click the Review button. You may navigate through all questions using the Next and Previous buttons. To skip commenting, go to the Review Screen by selecting the Review Screen button in the upper left-hand corner and from the Review Screen, select “Finished”.
Controls Available
For any question, one or more of the following controls might be available.
AZ-101 dumps exhibit
Keyboard Shortcuts Available
Exam features may be accessed using keyboard shortcuts. The following table describes the keyboard shortcuts that are available during this exam.
Some keyboard shortcuts require that you press two or more keys at the same time. These keys are separated by a plus sign (+) in the table below.
AZ-101 dumps exhibit
AZ-101 dumps exhibit

NEW QUESTION 2
You have an azure subscription that contain a virtual named VNet1. VNet1. contains four subnets named Gatesway, perimeter, NVA, and production.
The NVA contain two network virtual appliance (NVAs) that will network traffic inspection between the perimeter subnet and the production subnet.
You need o implement an Azure load balancer for the NVAs. The solution must meet the following requirements:
The NVAs must run in an active-active configuration that uses automatic failover.
The NVA must load balance traffic to two services on the Production subnet. The services have different IP addresses
Which three actions should you perform? Each correct answer presents parts of the solution.
NOTE: Each correct selection is worth one point.

  • A. Add two load balancing rules that have HA Ports enabled and Floating IP disabled.
  • B. Deploy a standard load balancer.
  • C. Add a frontend IP configuration, two backend pools, and a health prob.
  • D. Add a frontend IP configuration, a backend pool, and a health probe.
  • E. Add two load balancing rules that have HA Ports and Floating IP enabled.
  • F. Deploy a basic load balancer.

Answer: BCE

Explanation: A standard load balancer is required for the HA ports.
-Two backend pools are needed as there are two services with different IP addresses.
-Floating IP rule is used where backend ports are reused. Incorrect Answers:
F: HA Ports are not available for the basic load balancer. References:
https://docs.microsoft.com/en-us/azure/load-balancer/load-balancer-standard-overview https://docs.microsoft.com/en-us/azure/load-balancer/load-balancer-multivip-overview

NEW QUESTION 3
Your Azure environment contains an application gateway and custom apps.
Another administrator modifies the application gateway and the apps to use HTTP over TCP port 8080.
Users report that they can no longer connect to the apps.
You suspect that the cause of the issue is a change in the configuration of the application gateway.
You need to modify the application gateway to resolve the issue. What should you do from the Azure portal?

    Answer:

    Explanation: Step 1:
    Select Networking and then select Application Gateway in the Featured list, and select the application gateway, and select the settings.
    Step 2:
    Click HTTP for the protocol of the listener and make sure that the port is defined as 443.
    AZ-101 dumps exhibit
    References:
    https://docs.microsoft.com/en-us/azure/application-gateway/create-ssl-portal

    NEW QUESTION 4
    You are the global administrator for an Azure Active Directory (Azure AD) tenet named adatum.com. You need to enable two-step verification for Azure users.
    What should you do?

    • A. Create a sign-in risk policy in Azure AD Identity Protection
    • B. Enable Azure AD Privileged Identity Management.
    • C. Create and configure the Identity Hub.
    • D. Configure a security policy in Azure Security Center.

    Answer: A

    Explanation: With Azure Active Directory Identity Protection, you can:
    require users to register for multi-factor authentication
    handle risky sign-ins and compromised users References:
    https://docs.microsoft.com/en-us/azure/active-directory/identity-protection/flows

    NEW QUESTION 5
    You have an Azure App Service plan that hosts an Azure App Service named App1. You configure one production slot and four staging slots for App1.
    You need to allocate 10 percent of the traffic to each staging slot and 60 percent of the traffic to the production slot.
    What should you add to Appl1?

    • A. slots to the Testing in production blade
    • B. a performance test
    • C. a WebJob
    • D. templates to the Automation script blade

    Answer: A

    Explanation: Besides swapping, deployment slots offer another killer feature: testing in production. Just like the name suggests, using this, you can actually test in production. This means that you can route a specific percentage of user traffic to one or more of your deployment slots.
    Example:
    AZ-101 dumps exhibit
    References:
    https://stackify.com/azure-deployment-slots/

    NEW QUESTION 6
    You are building a custom Azure function app to connect to Azure Event Grid.
    You need to ensure that resources are allocated dynamically to the function app. Billing must be based on the executions of the app.
    What should you configure when you create the function app?

    • A. the Windows operating system and the Consumption plan hosting plan
    • B. the Windows operating system and the App Service plan hosting plan
    • C. the Docker container and an App Service plan that uses the Bl1 pricing tier
    • D. the Docker container and an App Service plan that uses the SI pricing

    Answer: A

    Explanation: Azure Functions runs in two different modes: Consumption plan and Azure App Service plan. The Consumption plan automatically allocates compute power when your code is running. Your app is scaled out when needed to handle load, and scaled down when code is not running.
    Incorrect Answers:
    B: When you run in an App Service plan, you must manage the scaling of your function app. References:
    https://docs.microsoft.com/en-us/azure/azure-functions/functions-create-first-azure-function

    NEW QUESTION 7
    You plan to move services from your on-premises network to Azure.
    You identify several virtual machines that you believe can be hosted in Azure. The virtual machines are shown in the following table.
    AZ-101 dumps exhibit
    Which two virtual machines can you access by using Azure migrate? Each correct answer presents a complete solution.
    NOTE: Each correct selection is worth one point.

    • A. Sea-CA0l
    • B. Hou-NW01
    • C. NYC-FS01
    • D. Sea-DC01
    • E. BOS-DB01

    Answer: CE

    NEW QUESTION 8
    DRAG DROP
    You have an Azure subscription that contains an Azure Service Bus named Bus1.
    Your company plans to deploy two Azure web apps named App1 and App2. The web apps will create messages that have the following requirements:
    Each message created by App1 must be consumed by only a single consumer
    Each message created by App2 will be consumed by multiple consumers.
    Which resource should you create for each web app? To answer, drag the appropriate resources to the correct web apps. Each resource may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
    NOTE: Each correct selection is worth one point.
    AZ-101 dumps exhibit

      Answer:

      Explanation: AZ-101 dumps exhibit

      NEW QUESTION 9
      You need to deploy an application gateway named appgwl015 to meet the following requirements: Load balance internal IP traffic to the Azure virtual machines connected to subnet0.
      Provide a Service Level Agreement (SLA) of 99.99 percent availability for the Azure virtual machines.
      What should you do from the Azure portal?

        Answer:

        Explanation: Step 1:
        Click New found on the upper left-hand corner of the Azure portal.
        Step 2:
        Select Networking and then select Application Gateway in the Featured list.
        Step 3:
        Enter these values for the application gateway: appgw1015 - for the name of the application gateway. SKU Size: Standard_V2
        The new SKU [Standard_V2] offers autoscaling and other critical performance enhancements.
        AZ-101 dumps exhibit
        Step 4:
        Accept the default values for the other settings and then click OK.
        Step 5:
        Click Choose a virtual network, and select subnet0. References:
        https://docs.microsoft.com/en-us/azure/application-gateway/application-gateway-create-gateway- portal

        NEW QUESTION 10
        You recently deployed a web app named homepagelod7509087.
        You need to back up the code used for the web app and to store the code in the homepagelod7509Q87 storage account. The solution must ensure that a new backup is created daily.
        What should you do from the Azure portal?

          Answer:

          Explanation: Step 1:
          Locate and select the web app homepagelod7509087, select Backups. The Backups page is displayed.
          AZ-101 dumps exhibit
          Step 2:
          In the Backup page, Click Configure. Step 3:
          In the Backup Configuration page, click Storage: Not configured to configure a storage account.
          AZ-101 dumps exhibit
          Step 4:
          Choose your backup destination by selecting a Storage Account and Container. Select the homepagelod7509087 storage account.
          Step 5:
          In the Backup Configuration page that is still left open, select Scheduled backup On, and configure daily backups.
          AZ-101 dumps exhibit
          Step 6:
          In the Backup Configuration page, click Save. Step 7:
          In the Backups page, click Backup. References:
          https://docs.microsoft.com/en-us/azure/app-service/web-sites-backup

          NEW QUESTION 11
          You need to deploy an Azure load balancer named Ib 1015 to your Azure subscription. The solution must meet the following requirements:
          -Support the load balancing of IP traffic from the Internet to Azure virtual machines connected to VNET1016 \subnet0.
          -Prov.de 4 Service level Agreement (SWJ of 99.99 percent ability for the Azure virtual machines.
          -Minimize Azure-related costs.
          What should you do from the Azure portal?
          To complete this task, you do NOT need to wait for the deployment to complete. Once the deployment start in Azure, you can move to the next task.

            Answer:

            Explanation: Step 1:
            On the top left-hand side of the screen, click Create a resource > Networking > Load Balancer. Step 2:
            In the Create a load balancer page enter these values for the load balancer: myLoadBalancer - for the name of the load balancer.
            Internal - for the type of the load balancer. Basic - for SKU version.
            Microsoft guarantees that apps running in a customer subscription will be available 99.99% of the time.
            VNET1016\subnet0 - for subnet that you choose from the list of existing subnets.
            Step 3: Accept the default values for the other settings and click Create to create the load balancer.

            NEW QUESTION 12
            Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
            After you answer a question in this section, you will NOT be able to return to it As a result these questions will not appear in the review screen.
            You have an Azure wet) app named Appl. App1 runs in an Azure App Service plan named Plan1. Plan1 is associated to the Free pricing tier.
            You discover that App1 stops each day after running continuously for 60 minutes. You need to ensure that App1 can run continuously for the entire day.
            Solution: You change the pricing tier of Plan1 to Shared. Does this meet the goal?

            • A. Yes
            • B. No

            Answer: B

            Explanation: You should switch to the Basic Tier.
            The Free Tier provides 60 CPU minutes / day. This explains why App1 is stops. The Shared Tier provides 240 CPU minutes / day. The Basic tier has no such cap.
            References:
            https://azure.microsoft.com/en-us/pricing/details/app-service/windows/

            NEW QUESTION 13
            You have an Azure Service Bus.
            You need to implement a Service Bus queue that guarantees first in first-out (FIFO) delivery of messages.
            What should you do?

            • A. Set the Lock Duration setting to 10 seconds.
            • B. Enable duplicate detection.
            • C. Set the Max Size setting of the queue to 5 GB.
            • D. Enable partitioning.
            • E. Enable sessions.

            Answer: E

            Explanation: Through the use of messaging sessions you can guarantee ordering of messages, that is first-in-first- out (FIFO) delivery of messages.
            References:
            https://docs.microsoft.com/en-us/azure/service-bus-messaging/service-bus-azure-and-service-bus- queues-compared-contrasted

            NEW QUESTION 14
            You need to create a web app named corp7509086n2 that can be scaled horizontally. The solution must use the lowest possible pricing tier for the App Service plan.
            What should you do from the Azure portal?

              Answer:

              Explanation: Step 1:
              In the Azure Portal, click Create a resource > Web + Mobile > Web App. Step 2:
              Use the Webb app settings as listed below. Web App name: corp7509086n2
              Hosting plan: Azure App Service plan Pricing tier of the Pricing Tier: Standard
              Change your hosting plan to Standard, you can't setup auto-scaling below standard tier.
              Step 3:
              Select Create to provision and deploy the Web app.
              References:
              https://docs.microsoft.com/en-us/azure/app-service/environment/app-service-web-how-to-create-a- web-app-in-an-ase
              https://azure.microsoft.com/en-us/pricing/details/app-service/plans/

              NEW QUESTION 15
              Note This question is part of a series of questions that present the same seer Some question sets might have more than one correct solution, while others might not have a correct solution.
              After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
              You manage a virtual network named VNet1 that is hosted in the West US Azure region.
              VNet1 hosts two virtual machines named VM1 and VM2 that run Windows Server. You need to inspect all the network traffic from VM1 to VM2 for a period of three hours.
              Solution: From Performance Monitor, you create a Data Collector Set (DCS) Does this meet the goal?

              • A. Yes
              • B. No

              Answer: B

              Explanation: You should use Azure Network Watcher. References:
              https://docs.microsoft.com/en-us/azure/network-watcher/network-watcher-monitoring-overview

              NEW QUESTION 16
              Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals.
              Some question sets might have more than one correct solution, while others might not have a correct solution.
              After you answer a question in this section, you will NOT be able to return to these questions will not appear m the review screen.
              You manage a virtual network named VNetl1 that is hosted in the West US Azure region.
              VNetl1 hosts two virtual machines named VM1 and VM2 that run Windows Server. You need to inspect all the network traffic from VM1 to VM2 for a period of three hours.
              Solution: From Azure Network Watcher, you create a packet capture. Does this meet the goal?

              • A. Yes
              • B. No

              Answer: A

              Explanation: Azure Network Watcher provides tools to monitor, diagnose, view metrics, and enable or disable logs for resources in an Azure virtual network.
              Capture packets to and from a VM
              Advanced filtering options and fine-tuned controls, such as the ability to set time and size limitations, provide versatility. The capture can be stored in Azure Storage, on the VM's disk, or both. You can then analyze the capture file using several standard network capture analysis tools.
              Network Watcher variable packet capture allows you to create packet capture sessions to track traffic to and from a virtual machine. Packet capture helps to diagnose network anomalies both reactively and proactivity.
              References:
              https://docs.microsoft.com/en-us/azure/network-watcher/network-watcher-monitoring-overview

              Thanks for reading the newest AZ-101 exam dumps! We recommend you to try the PREMIUM Certleader AZ-101 dumps in VCE and PDF here: https://www.certleader.com/AZ-101-dumps.html (67 Q&As Dumps)